Display a summary of the operating system noise¶
- Manual section
rtla osnoise top [OPTIONS]
The rtla osnoise tool is an interface for the osnoise tracer. The osnoise tracer dispatches a kernel thread per-cpu. These threads read the time in a loop while with preemption, softirq and IRQs enabled, thus allowing all the sources of operating system noise during its execution. The osnoise's tracer threads take note of the delta between each time read, along with an interference counter of all sources of interference. At the end of each period, the osnoise tracer displays a summary of the results.
rtla osnoise top collects the periodic summary from the osnoise tracer, including the counters of the occurrence of the interference source, displaying the results in a user-friendly format.
The tool also allows many configurations of the osnoise tracer and the collection of the tracer output.
-a, --auto us
Set the automatic trace mode. This mode sets some commonly used options while debugging the system. It is equivalent to use -s us -T 1 -t.
-p, --period us
Set the osnoise tracer period in microseconds.
-r, --runtime us
Set the osnoise tracer runtime in microseconds.
-s, --stop us
Stop the trace if a single sample is higher than the argument in microseconds. If -T is set, it will also save the trace to the output.
-S, --stop-total us
Stop the trace if the total sample is higher than the argument in microseconds. If -T is set, it will also save the trace to the output.
-T, --threshold us
Specify the minimum delta between two time reads to be considered noise. The default threshold is 5 us.
Print only a summary at the end of the session.
-c, --cpus cpu-list
Set the osnoise tracer to run the sample threads in the cpu-list.
-H, --house-keeping cpu-list
Run rtla control threads only on the given cpu-list.
-d, --duration time[s|m|h|d]
Set the duration of the session.
Print debug info.
Save the stopped trace to [file|osnoise_trace.txt].
-e, --event sys:event
Enable an event in the trace (-t) session. The argument can be a specific event, e.g., -e sched:sched_switch, or all events of a system group, e.g., -e sched. Multiple -e are allowed. It is only active when -t or -a are set.
Filter the previous -e sys:event event with <filter>. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering.
- --trigger <trigger>
Enable a trace event trigger to the previous -e sys:event. If the hist: trigger is activated, the output histogram will be automatically saved to a file named system_event_hist.txt. For example, the command:
rtla <command> <mode> -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount"
Will automatically save the content of the histogram associated to osnoise:irq_noise event in osnoise_irq_noise_hist.txt.
For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers.
-P, --priority o:prio|r:prio|f:prio|d:runtime:period
Set scheduling parameters to the osnoise tracer threads, the format to set the priority are:
o:prio - use SCHED_OTHER with prio;
r:prio - use SCHED_RR with prio;
f:prio - use SCHED_FIFO with prio;
d:runtime[us|ms|s]:period[us|ms|s] - use SCHED_DEADLINE with runtime and period in nanoseconds.
Set a cgroup to the tracer's threads. If the -C option is passed without arguments, the tracer's thread will inherit rtla's cgroup. Otherwise, the threads will be placed on the cgroup passed to the option.
Print help menu.
In the example below, the rtla osnoise top tool is set to run with a real-time priority FIFO:1, on CPUs 0-3, for 900ms at each period (1s by default). The reason for reducing the runtime is to avoid starving the rtla tool. The tool is also set to run for one minute and to display a summary of the report at the end of the session:
[root@f34 ~]# rtla osnoise top -P F:1 -c 0-3 -r 900000 -d 1M -q Operating System Noise duration: 0 00:01:00 | time is in us CPU Period Runtime Noise % CPU Aval Max Noise Max Single HW NMI IRQ Softirq Thread 0 #59 53100000 304896 99.42580 6978 56 549 0 53111 1590 13 1 #59 53100000 338339 99.36282 8092 24 399 0 53130 1448 31 2 #59 53100000 290842 99.45227 6582 39 855 0 53110 1406 12 3 #59 53100000 204935 99.61405 6251 33 290 0 53156 1460 12
Osnoise tracer documentation: <https://www.kernel.org/doc/html/latest/trace/osnoise-tracer.html>
rtla is Free Software licensed under the GNU GPLv2
Copyright (C) 2021 Red Hat, Inc. Free use of this software is granted under the terms of the GNU Public License (GPL).