AD7380 driver¶
ADC driver for Analog Devices Inc. AD7380 and similar devices. The module name
is ad7380
.
Supported devices¶
The following chips are supported by this driver:
Supported features¶
SPI wiring modes¶
ad738x ADCs can output data on several SDO lines (1/2/4). The driver currently supports only 1 SDO line.
Reference voltage¶
2 possible reference voltage sources are supported:
Internal reference (2.5V)
External reference (2.5V to 3.3V)
The source is determined by the device tree. If refio-supply
is present,
then the external reference is used, else the internal reference is used.
Oversampling and resolution boost¶
This family supports 2 types of oversampling: normal average and rolling average. Only normal average is supported by the driver, as rolling average can be achieved by processing a captured data buffer. The following ratios are available: 1 (oversampling disabled)/2/4/8/16/32.
When the on-chip oversampling function is enabled the performance of the ADC can exceed the default resolution. To accommodate the performance boost achievable, it is possible to enable an additional two bits of resolution. Because the resolution boost feature can only be enabled when oversampling is enabled and oversampling is not as useful without the resolution boost, the driver automatically enables the resolution boost if and only if oversampling is enabled.
Since the resolution boost feature causes 16-bit chips to now have 18-bit data which means the storagebits has to change from 16 to 32 bits, we use the new ext_scan_type feature to allow changing the scan_type at runtime. Unfortunately libiio does not support it. So when enabling or disabling oversampling, user must restart iiod using the following command:
root:~# systemctl restart iiod
Channel selection and sequencer (single-end chips only)¶
Single-ended chips of this family (ad7386/7/8(-4)) have a 2:1 multiplexer in front of each ADC. They also include additional configuration registers that allow for either manual selection or automatic switching (sequencer mode), of the multiplexer inputs.
From an IIO point of view, all inputs are exported, i.e ad7386/7/8 export 4 channels and ad7386-4/7-4/8-4 export 8 channels.
Inputs AinX0
of multiplexers correspond to the first half of IIO channels (i.e
0-1 or 0-3) and inputs AinX1
correspond to second half (i.e 2-3 or 4-7).
Example for AD7386/7/8 (2 channels parts):
IIO | AD7386/7/8
| +----------------------------
| | _____ ______
| | | | | |
voltage0 | AinA0 --|--->| | | |
| | | mux |----->| ADCA |---
voltage2 | AinA1 --|--->| | | |
| | |_____| |_____ |
| | _____ ______
| | | | | |
voltage1 | AinB0 --|--->| | | |
| | | mux |----->| ADCB |---
voltage3 | AinB1 --|--->| | | |
| | |_____| |______|
| |
| +----------------------------
When enabling sequencer mode, the effective sampling rate is divided by two.
Unimplemented features¶
2/4 SDO lines
Rolling average oversampling
Power down mode
CRC indication
Alert
Device buffers¶
This driver supports IIO triggered buffers.
See Industrial IIO device buffers for more information.