Authenticated Encryption With Associated Data (AEAD) Algorithm Definitions¶
The AEAD cipher API is used with the ciphers of type CRYPTO_ALG_TYPE_AEAD (listed as type “aead” in /proc/crypto)
The most prominent examples for this type of encryption is GCM and CCM. However, the kernel supports other types of AEAD ciphers which are defined with the following cipher string:
authenc(keyed message digest, block cipher)
For example: authenc(hmac(sha256), cbc(aes))
The example code provided for the symmetric key cipher operation applies here as well. Naturally all skcipher symbols must be exchanged the aead pendants discussed in the following. In addition, for the AEAD operation, the aead_request_set_ad function must be used to set the pointer to the associated data memory location before performing the encryption or decryption operation. In case of an encryption, the associated data memory is filled during the encryption operation. For decryption, the associated data memory must contain data that is used to verify the integrity of the decrypted data. Another deviation from the asynchronous block cipher operation is that the caller should explicitly check for -EBADMSG of the crypto_aead_decrypt. That error indicates an authentication error, i.e. a breach in the integrity of the message. In essence, that -EBADMSG error code is the key bonus an AEAD cipher has over “standard” block chaining modes.
Memory Structure:
To support the needs of the most prominent user of AEAD ciphers, namely IPSEC, the AEAD ciphers have a special memory layout the caller must adhere to.
The scatter list pointing to the input data must contain:
- for RFC4106 ciphers, the concatenation of associated authentication data || IV || plaintext or ciphertext. Note, the same IV (buffer) is also set with the aead_request_set_crypt call. Note, the API call of aead_request_set_ad must provide the length of the AAD and the IV. The API call of aead_request_set_crypt only points to the size of the input plaintext or ciphertext.
- for “normal” AEAD ciphers, the concatenation of associated authentication data || plaintext or ciphertext.
It is important to note that if multiple scatter gather list entries form the input data mentioned above, the first entry must not point to a NULL buffer. If there is any potential where the AAD buffer can be NULL, the calling code must contain a precaution to ensure that this does not result in the first scatter gather list entry pointing to a NULL buffer.
-
struct
aead_request
¶ AEAD request
Definition
struct aead_request {
struct crypto_async_request base;
unsigned int assoclen;
unsigned int cryptlen;
u8 *iv;
struct scatterlist *src;
struct scatterlist *dst;
void *__ctx[];
};
Members
base
- Common attributes for async crypto requests
assoclen
- Length in bytes of associated data for authentication
cryptlen
- Length of data to be encrypted or decrypted
iv
- Initialisation vector
src
- Source data
dst
- Destination data
__ctx
- Start of private context data
-
struct
aead_alg
¶ AEAD cipher definition
Definition
struct aead_alg {
int (*setkey)(struct crypto_aead *tfm, const u8 *key, unsigned int keylen);
int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize);
int (*encrypt)(struct aead_request *req);
int (*decrypt)(struct aead_request *req);
int (*init)(struct crypto_aead *tfm);
void (*exit)(struct crypto_aead *tfm);
const char *geniv;
unsigned int ivsize;
unsigned int maxauthsize;
unsigned int chunksize;
struct crypto_alg base;
};
Members
setkey
- see struct skcipher_alg
setauthsize
- Set authentication size for the AEAD transformation. This function is used to specify the consumer requested size of the authentication tag to be either generated by the transformation during encryption or the size of the authentication tag to be supplied during the decryption operation. This function is also responsible for checking the authentication tag size for validity.
encrypt
- see struct skcipher_alg
decrypt
- see struct skcipher_alg
init
- Initialize the cryptographic transformation object. This function is used to initialize the cryptographic transformation object. This function is called only once at the instantiation time, right after the transformation context was allocated. In case the cryptographic hardware has some special requirements which need to be handled by software, this function shall check for the precise requirement of the transformation and put any software fallbacks in place.
exit
- Deinitialize the cryptographic transformation object. This is a counterpart to init, used to remove various changes set in init.
geniv
- see struct skcipher_alg
ivsize
- see struct skcipher_alg
maxauthsize
- Set the maximum authentication tag size supported by the transformation. A transformation may support smaller tag sizes. As the authentication tag is a message digest to ensure the integrity of the encrypted data, a consumer typically wants the largest authentication tag possible as defined by this variable.
chunksize
- see struct skcipher_alg
base
- Definition of a generic crypto cipher algorithm.
Description
All fields except ivsize is mandatory and must be filled.
Authenticated Encryption With Associated Data (AEAD) Cipher API¶
-
struct crypto_aead *
crypto_alloc_aead
(const char * alg_name, u32 type, u32 mask)¶ allocate AEAD cipher handle
Parameters
const char * alg_name
- is the cra_name / name or cra_driver_name / driver name of the AEAD cipher
u32 type
- specifies the type of the cipher
u32 mask
- specifies the mask for the cipher
Description
Allocate a cipher handle for an AEAD. The returned struct crypto_aead is the cipher handle that is required for any subsequent API invocation for that AEAD.
Return
- allocated cipher handle in case of success;
IS_ERR()
is true in case - of an error,
PTR_ERR()
returns the error code.
-
void
crypto_free_aead
(struct crypto_aead * tfm)¶ zeroize and free aead handle
Parameters
struct crypto_aead * tfm
- cipher handle to be freed
-
unsigned int
crypto_aead_ivsize
(struct crypto_aead * tfm)¶ obtain IV size
Parameters
struct crypto_aead * tfm
- cipher handle
Description
The size of the IV for the aead referenced by the cipher handle is returned. This IV size may be zero if the cipher does not need an IV.
Return
IV size in bytes
-
unsigned int
crypto_aead_authsize
(struct crypto_aead * tfm)¶ obtain maximum authentication data size
Parameters
struct crypto_aead * tfm
- cipher handle
Description
The maximum size of the authentication data for the AEAD cipher referenced by the AEAD cipher handle is returned. The authentication data size may be zero if the cipher implements a hard-coded maximum.
The authentication data may also be known as “tag value”.
Return
authentication data size / tag size in bytes
-
unsigned int
crypto_aead_blocksize
(struct crypto_aead * tfm)¶ obtain block size of cipher
Parameters
struct crypto_aead * tfm
- cipher handle
Description
The block size for the AEAD referenced with the cipher handle is returned. The caller may use that information to allocate appropriate memory for the data returned by the encryption or decryption operation
Return
block size of cipher
-
int
crypto_aead_setkey
(struct crypto_aead * tfm, const u8 * key, unsigned int keylen)¶ set key for cipher
Parameters
struct crypto_aead * tfm
- cipher handle
const u8 * key
- buffer holding the key
unsigned int keylen
- length of the key in bytes
Description
The caller provided key is set for the AEAD referenced by the cipher handle.
Note, the key length determines the cipher type. Many block ciphers implement different cipher modes depending on the key size, such as AES-128 vs AES-192 vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128 is performed.
Return
0 if the setting of the key was successful; < 0 if an error occurred
-
int
crypto_aead_setauthsize
(struct crypto_aead * tfm, unsigned int authsize)¶ set authentication data size
Parameters
struct crypto_aead * tfm
- cipher handle
unsigned int authsize
- size of the authentication data / tag in bytes
Description
Set the authentication data size / tag size. AEAD requires an authentication tag (or MAC) in addition to the associated data.
Return
0 if the setting of the key was successful; < 0 if an error occurred
-
int
crypto_aead_encrypt
(struct aead_request * req)¶ encrypt plaintext
Parameters
struct aead_request * req
- reference to the aead_request handle that holds all information needed to perform the cipher operation
Description
Encrypt plaintext data using the aead_request handle. That data structure and how it is filled with data is discussed with the aead_request_* functions.
- IMPORTANT NOTE The encryption operation creates the authentication data /
- tag. That data is concatenated with the created ciphertext. The ciphertext memory size is therefore the given number of block cipher blocks + the size defined by the crypto_aead_setauthsize invocation. The caller must ensure that sufficient memory is available for the ciphertext and the authentication tag.
Return
0 if the cipher operation was successful; < 0 if an error occurred
-
int
crypto_aead_decrypt
(struct aead_request * req)¶ decrypt ciphertext
Parameters
struct aead_request * req
- reference to the ablkcipher_request handle that holds all information needed to perform the cipher operation
Description
Decrypt ciphertext data using the aead_request handle. That data structure and how it is filled with data is discussed with the aead_request_* functions.
- IMPORTANT NOTE The caller must concatenate the ciphertext followed by the
- authentication data / tag. That authentication data / tag must have the size defined by the crypto_aead_setauthsize invocation.
Return
- 0 if the cipher operation was successful; -EBADMSG: The AEAD
- cipher operation performs the authentication of the data during the decryption operation. Therefore, the function returns this error if the authentication of the ciphertext was unsuccessful (i.e. the integrity of the ciphertext or the associated data was violated); < 0 if an error occurred.
Asynchronous AEAD Request Handle¶
The aead_request data structure contains all pointers to data required for the AEAD cipher operation. This includes the cipher handle (which can be used by multiple aead_request instances), pointer to plaintext and ciphertext, asynchronous callback function, etc. It acts as a handle to the aead_request_* API calls in a similar way as AEAD handle to the crypto_aead_* API calls.
-
unsigned int
crypto_aead_reqsize
(struct crypto_aead * tfm)¶ obtain size of the request data structure
Parameters
struct crypto_aead * tfm
- cipher handle
Return
number of bytes
-
void
aead_request_set_tfm
(struct aead_request * req, struct crypto_aead * tfm)¶ update cipher handle reference in request
Parameters
struct aead_request * req
- request handle to be modified
struct crypto_aead * tfm
- cipher handle that shall be added to the request handle
Description
Allow the caller to replace the existing aead handle in the request data structure with a different one.
-
struct aead_request *
aead_request_alloc
(struct crypto_aead * tfm, gfp_t gfp)¶ allocate request data structure
Parameters
struct crypto_aead * tfm
- cipher handle to be registered with the request
gfp_t gfp
- memory allocation flag that is handed to kmalloc by the API call.
Description
Allocate the request data structure that must be used with the AEAD encrypt and decrypt API calls. During the allocation, the provided aead handle is registered in the request data structure.
Return
allocated request handle in case of success, or NULL if out of memory
-
void
aead_request_free
(struct aead_request * req)¶ zeroize and free request data structure
Parameters
struct aead_request * req
- request data structure cipher handle to be freed
-
void
aead_request_set_callback
(struct aead_request * req, u32 flags, crypto_completion_t compl, void * data)¶ set asynchronous callback function
Parameters
struct aead_request * req
- request handle
u32 flags
- specify zero or an ORing of the flags CRYPTO_TFM_REQ_MAY_BACKLOG the request queue may back log and increase the wait queue beyond the initial maximum size; CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep
crypto_completion_t compl
- callback function pointer to be registered with the request handle
void * data
- The data pointer refers to memory that is not used by the kernel crypto API, but provided to the callback function for it to use. Here, the caller can provide a reference to memory the callback function can operate on. As the callback function is invoked asynchronously to the related functionality, it may need to access data structures of the related functionality which can be referenced using this pointer. The callback function can access the memory via the “data” field in the crypto_async_request data structure provided to the callback function.
Description
Setting the callback function that is triggered once the cipher operation completes
The callback function is registered with the aead_request handle and must comply with the following template:
void callback_function(struct crypto_async_request *req, int error)
-
void
aead_request_set_crypt
(struct aead_request * req, struct scatterlist * src, struct scatterlist * dst, unsigned int cryptlen, u8 * iv)¶ set data buffers
Parameters
struct aead_request * req
- request handle
struct scatterlist * src
- source scatter / gather list
struct scatterlist * dst
- destination scatter / gather list
unsigned int cryptlen
- number of bytes to process from src
u8 * iv
- IV for the cipher operation which must comply with the IV size defined
by
crypto_aead_ivsize()
Description
Setting the source data and destination data scatter / gather lists which hold the associated data concatenated with the plaintext or ciphertext. See below for the authentication tag.
For encryption, the source is treated as the plaintext and the destination is the ciphertext. For a decryption operation, the use is reversed - the source is the ciphertext and the destination is the plaintext.
The memory structure for cipher operation has the following structure:
- AEAD encryption input: assoc data || plaintext
- AEAD encryption output: assoc data || cipherntext || auth tag
- AEAD decryption input: assoc data || ciphertext || auth tag
- AEAD decryption output: assoc data || plaintext
Albeit the kernel requires the presence of the AAD buffer, however, the kernel does not fill the AAD buffer in the output case. If the caller wants to have that data buffer filled, the caller must either use an in-place cipher operation (i.e. same memory location for input/output memory location).
-
void
aead_request_set_ad
(struct aead_request * req, unsigned int assoclen)¶ set associated data information
Parameters
struct aead_request * req
- request handle
unsigned int assoclen
- number of bytes in associated data
Description
Setting the AD information. This function sets the length of the associated data.